- ページ 7

エクステンダー ADDER AdderLink X100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADDER AdderLink X100 19 ページ。 Extender set
ADDER AdderLink X100 にも：ユーザーマニュアル (19 ページ)

X100 module switches

Certain aspects of operation can be affected by the switches on the X100

receiver.

OFF: Normal operation

ON: Flash upgrade

Determines configuration

of hotkeys in conjunction

with switch

Note: When shipped, all switches are set in the OFF positions and this will

produce normal operation.

Determines configuration

Switch

of hotkeys in conjunction

OFF: Normal operation.

with switch

ON: (Before power is applied) Places the X100 receiver into flash upgrade

Reserved for

mode so that the internal software can be changed. Please see the

future use

upgrade

Switches and

Switches 2 and 3 determine which two keyboard keys (when pressed in unison)

are to be designated as 'hotkeys'. Hotkeys signal to the X100 receiver that the

next key to be pressed is a special configuration command for the module and is

not to be passed to the computer system.

2 OFF

3 OFF

2 OFF

3 ON

2 ON

3 OFF

2 ON

3 ON

Switch

This switch is reserved for future use.

section in the 'Special configuration' chapter.

Hotkeys = CTRL and SHIFT

Hotkeys = ALT and SHIFT

Hotkeys = CTRL and ALT

Hotkeys disabled

Flash.