- ページ 6

エクステンダー ADDER AdderLink X100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADDER AdderLink X100 19 ページ。 Extender set
ADDER AdderLink X100 にも：ユーザーマニュアル (19 ページ)

Connections at the X100 receiver

1 Place the X100 receiver adjacent to the remote user location.

2 Attach the video monitor, keyboard, mouse (and, optionally for X100A

and X100AS users, speaker) connectors to the sockets of the Adder X100

receiver.

From mouse

From keyboard

From video monitor

3 Attach the connector of the cable run leading from the local device to the

TO LOCAL

Category 5, 5e or 6

cable leading to the

Adder X00

module

4 (X100A and X100AS models only) Insert the speaker connector to the light

green coloured socket situated between the link connector and the power in

socket.

5 Insert the output connector of the power supply into the socket at the front

edge of the X100 receiver labelled

6 Insert the IEC connector of the supplied power lead into the corresponding

socket of the power supply. Connect the other end of the power lead to a

nearby mains socket.

7 Where necessary, use the in-built video compensation feature to eliminate

any effects caused by the cable run. See

socket of the X100 receiver.

local device

From

speakers

power

(X00A and

adapter

X00AS models

only)

POWER

Video.compensation

Adder X00

module

for details.