ページを印刷する
Assembly Instructions
Always unplug the unit from the electrical outlet
DANGER!
immediately after using, before cleaning, performing
maintenance and putting on or taking off parts.
Read all instructions in this guide before installing.
Assemble and operate your equipment on a hard, level surface in the area intended
for use.
Open the b
ox and assemble the components in the sequence presented in this
guide.
Attach all fasteners and partially tighten them. Do not fully tighten fasteners until
instructed to do so.
Do not attempt to move the equipment by yourself .
Have at least one other person help you,and use safe lifting techniques.
Do not grasp any plastic parts of the unit while lifting or moving the unit.
The plastic parts are non-structural covers and are not capable of supporting
the weight of the unit.
Hardware Kit
05
Assembly Steps
Step 1
①Remove the packing tape and open the carton,as shown below
Step 2
①Take down the big handrail,console,console stand and parts box.
Take down the wood screw which is used to connect the frame and pallet.
(keep the bolt which is used to secure the console ,and will be used
to assemble the machine)
Big Handrail
Console
Console Stand
Parts Box
Wood Screw
06