AnyFit AI 3 사용자 설명서 - 페이지 5

{카테고리_이름} AnyFit AI 3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyFit AI 3 10 페이지.

Assembly Instructions

Always unplug the unit from the electrical outlet

DANGER!

immediately after using, before cleaning, performing

maintenance and putting on or taking off parts.

Read all instructions in this guide before installing.

Assemble and operate your equipment on a hard, level surface in the area intended

for use.

Open the b

ox and assemble the components in the sequence presented in this

guide.

Attach all fasteners and partially tighten them. Do not fully tighten fasteners until

instructed to do so.

Do not attempt to move the equipment by yourself .

Have at least one other person help you,and use safe lifting techniques.

Do not grasp any plastic parts of the unit while lifting or moving the unit.

The plastic parts are non-structural covers and are not capable of supporting

the weight of the unit.

Hardware Kit

Step 1

①Remove the packing tape and open the carton,as shown below

Step 2

①Take down the big handrail,console,console stand and parts box.

Take down the wood screw which is used to connect the frame and pallet.

(keep the bolt which is used to secure the console ,and will be used

to assemble the machine)

Big Handrail

Console

Console Stand

Parts Box

Wood Screw