- ページ 3

体重計 Anyload EC100のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Anyload EC100 6 ページ。 Counting scale
Anyload EC100 にも：操作マニュアル (12 ページ)

2.2 Indicator Lamps:

LAMP

ZERO

TARE

LACK of SAMPLE

3. OPERATION:

3.1 TARE

3.1.1. Reduce tare weight

Place the empty container on the platter. Press [TARE] key then the tare indicator is

turned on, the WEIGHT display shows Zero.

Remove the container from the platter after having reduced the weight, the WEIGHT

display shows a minus sign.

3.1.2. Clearing the previous tare value:

Remove weights from the platter then press [TARE] key so that the Tare indicator turns off

and WEIGHT display returns to Zero.

3.2 SAMPLE SETTING

There are two sample setting methods.

3.2.1 Number setting:

This setting is used in the case of counting the unknown unit weight.

Place a certain number of samples on the platter, total weight will be displayed in

WEIGHT display.

Set the number of samples through numeric keys. Set number will be showed in UNIT

WEIGHT display with flickering.

Press the [SAMPLE/UNIT] key, UNIT WEIGHT display shows the averaged unit weight

per piece and TOTAL display shows the number of samples.

3.2.2. Unit weight setting:

This setting is used in the case of unit weight is already known.

Set the unit weight data, then numbers will be displayed with flickering in UNIT WEIGHT.

Press [UNIT WEIGHT] key, then flickering of UNIT WEIGHT display will stop.

To cancel previous unit weight and sample setting, press [CE] key.

3.3. ALARM FUNCTION

To avoid counting error, the scale has useful alarm function to inform an operator the

counting error feasibility in case of sample number shortage or weight shortage of sample

unit weight.

"ON"

When the gross weight is zero

When tare weight is set

When the sample unit weight is not heavy enough for accurate

counting operation in case of number of sample setting mode