Anyload EC100 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi Anyload EC100. Anyload EC100 6 stron. Counting scale
Również dla Anyload EC100: Instrukcja obsługi (12 strony)
Drukuj stronę2.2 Indicator Lamps:
LAMP
ZERO
TARE
LACK of SAMPLE
3. OPERATION:
3.1 TARE
3.1.1. Reduce tare weight
Place the empty container on the platter. Press [TARE] key then the tare indicator is
turned on, the WEIGHT display shows Zero.
Remove the container from the platter after having reduced the weight, the WEIGHT
display shows a minus sign.
3.1.2. Clearing the previous tare value:
Remove weights from the platter then press [TARE] key so that the Tare indicator turns off
and WEIGHT display returns to Zero.
3.2 SAMPLE SETTING
There are two sample setting methods.
3.2.1 Number setting:
This setting is used in the case of counting the unknown unit weight.
Place a certain number of samples on the platter, total weight will be displayed in
WEIGHT display.
Set the number of samples through numeric keys. Set number will be showed in UNIT
WEIGHT display with flickering.
Press the [SAMPLE/UNIT] key, UNIT WEIGHT display shows the averaged unit weight
per piece and TOTAL display shows the number of samples.
3.2.2. Unit weight setting:
This setting is used in the case of unit weight is already known.
Set the unit weight data, then numbers will be displayed with flickering in UNIT WEIGHT.
Press [UNIT WEIGHT] key, then flickering of UNIT WEIGHT display will stop.
To cancel previous unit weight and sample setting, press [CE] key.
3.3. ALARM FUNCTION
To avoid counting error, the scale has useful alarm function to inform an operator the
counting error feasibility in case of sample number shortage or weight shortage of sample
unit weight.
"ON"
When the gross weight is zero
When tare weight is set
When the sample unit weight is not heavy enough for accurate
counting operation in case of number of sample setting mode
3