- ページ 4

体重計 Anyload EC100のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Anyload EC100 12 ページ。 Counting scale
Anyload EC100 にも：操作マニュアル (6 ページ)

the rear of the equipment or the power adapter. If liquid is spilt on the

weighing machine, it must immediately be unplugged from the mains

electricity supply (pull out power adapter). The weighing machine may

only be operated again after it has first been re-checked by a service

technician.

These instructions must be read by each operator of the equipment and must

be available at the workplace at all times.

Preparation

Place the scale horizontally and keep the bubble inside the bubble

level aligned with the red circle (See Fig.1).

Correct

KEY

WEIGHT

UNIT WEIGHT

TOTAL

NUMERIC (0-9)

DECIMAL POINT (.)

[ZERO]

[TARE]

[SAMPLE/UNIT]

[UNIT WEIGHT]

3 |

ANYLOAD EC100 Counting Scale Operations Manual (V1611)

(Fig.1)

Function

Indicates the gross or net (when the tare function

is activated) weight

Indicates the average or set unit weight

Indicates the accumulated total piece number on the

platter

To set numeric data for number of samples, samples

weight or limit number of checking

To set the decimal position of samples' weight

To set or re-adjust the scale in correct zero

position for accurate counting operation

To reduce the gross weight on the platter (box or

container etc.) as the tare weight

To set the counted samples number on the

platter into scale's memory

To set the known unit weight data into scale in normal

operation

incorrect