Anyload EC100 운영 매뉴얼 - 페이지 4
{카테고리_이름} Anyload EC100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload EC100 12 페이지. Counting scale
Anyload EC100에 대해서도 마찬가지입니다: 운영 매뉴얼 (6 페이지)
the rear of the equipment or the power adapter. If liquid is spilt on the
weighing machine, it must immediately be unplugged from the mains
electricity supply (pull out power adapter). The weighing machine may
only be operated again after it has first been re-checked by a service
technician.
These instructions must be read by each operator of the equipment and must
be available at the workplace at all times.
3.
Preparation
Place the scale horizontally and keep the bubble inside the bubble
level aligned with the red circle (See Fig.1).
Correct
4.
Functions
4.1 Key Functions
KEY
WEIGHT
UNIT WEIGHT
TOTAL
NUMERIC (0-9)
DECIMAL POINT (.)
[ZERO]
[TARE]
[SAMPLE/UNIT]
[UNIT WEIGHT]
3 |
ANYLOAD EC100 Counting Scale Operations Manual (V1611)
(Fig.1)
Function
Indicates the gross or net (when the tare function
is activated) weight
Indicates the average or set unit weight
Indicates the accumulated total piece number on the
platter
To set numeric data for number of samples, samples
weight or limit number of checking
To set the decimal position of samples' weight
To set or re-adjust the scale in correct zero
position for accurate counting operation
To reduce the gross weight on the platter (box or
container etc.) as the tare weight
To set the counted samples number on the
platter into scale's memory
To set the known unit weight data into scale in normal
operation
incorrect