- ページ 12

ラジオ AnyTone ARES IIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AnyTone ARES II 16 ページ。
AnyTone ARES II にも：取扱説明書 (16 ページ)

HOW TO USE YOUR RADIO

Power OFF/ON

1. Turn VOL clockwise to switch the radio ON, the radio may emit a beep (if the

beep function is enabled). The LED display will show a channel number.

2. Turn VOL anti-clockwise to switch the radio OFF.

Volume Control

When the radio is turned on, turning VOL clockwise will increase the Volume level.

Turning VOL anti-clockwise will reduce the Volume level.

Note: Adjust the Volume during communication to obtain a suitable level.

Squelch Control

When the radio is receiving, turn SQ control clockwise to adjust the Squelch level.

Mic Gain Control

When the radio is transmitting, turn MIG control to adjust the Microphone Gain. Turn

the control clockwise to increase Mic Gain, and anti-clockwise to reduce Mic Gain.

RF Gain Control

When the radio is receiving, turn RFG control to adjust the RF Gain. Turn the control

clockwise to increase RF Gain, and anti-clockwise to reduce RF Gain.

RF POWER Control

Valid for AM/FM/LSB/USB modes. Turn PWR control to adjust the TX Output Power.

Turn the control clockwise to increase Power, and anti-clockwise to reduce Power.

SCAN Function

1. With the radio in receive mode, press and hold the [UP] or [DN] key on

the microphone for approximately 7 seconds until the SCAN feature

starts. The dot "." between the two channel digits on the LCD display

flashes to indicate that the SCAN feature is active.

2. Rotate the Channel switch or press either of the [UP/DN] keys on the

microphone to change the SCAN direction.

3. Short press [PTT] to exit SCAN mode.

Note: SCAN mode is available in all modes where the squelch is closed

(audio muted), including WX/FM Receiver 140-170MHz mode.

MODE Switch Control

Turn the mode switch to choose between PA/FM/AM/USB/LSB modes.

BAND Switch Control

Turn the band switch to select A/B/C/D/E/F band.

Channel / Frequency Control

Turn the channel control to select the desired channel.

Turn the control clockwise to increase, and anti-clockwise to decrease.

Scrolling Frequency Display

Hold the microphone [UP] and [DN] keys simultaneously, the LED display will show

the working frequency. For example, 28.2050MHz will display as 28-20-50 repeatedly

until the [UP] and [DN] keys are released.

◆