- ページ 2

ブルーレイドライブ Anywire ARW-03のPDF システム製品マニュアルをオンラインで閲覧またはダウンロードできます。Anywire ARW-03 6 ページ。 Address writer
Anywire ARW-03 にも：製品マニュアル (17 ページ)

[Connection method]

Turn off the ARW-04 or ARW-03, ① remove the cover on the RH connector part and ② connect the connector of the ARW-RH.

* This gure shows an ARW-04 as an example.

[Operation method]

As for the operation method of the ARW-03 and ARW-04, please refer to the other sections.

■Writing

Set address values to be written in the ARW-04 or ARW-03 in advance.

Point the optical axis window of the ARW-RH to the address writing port of the target unit.

Press the SET button on the ARW-04 or ARW-03 to write an address value.

When writing is successful, a beep sounds.

When "ERR" is displayed, readjust the optical axis to press the SET button again.

■Reading

Set the ARW-04 or ARW-03 to the reading mode in advance.

Point the optical axis window of the ARW-RH to the address writing port of the target unit.

Press the SET button on the ARW-04 or ARW-03 to write an address value.

When writing is successful, a beep sounds.

When "ERR" is displayed, readjust the optical axis to press the SET button again.

①

②

To RH connector

-ARWRH 2/6-

ARW-RH

SET button

* This gure shows an ARW-04 as an example.

POWER