Anywire ARW-03 Manual do produto do sistema - Página 2
Procurar online ou descarregar pdf Manual do produto do sistema para Unidade Blu-ray Anywire ARW-03. Anywire ARW-03 6 páginas. Address writer
Também para Anywire ARW-03: Manual do produto (17 páginas)
Imprimir página[Connection method]
Turn off the ARW-04 or ARW-03, ① remove the cover on the RH connector part and ② connect the connector of the ARW-RH.
* This gure shows an ARW-04 as an example.
[Operation method]
As for the operation method of the ARW-03 and ARW-04, please refer to the other sections.
■Writing
Set address values to be written in the ARW-04 or ARW-03 in advance.
Point the optical axis window of the ARW-RH to the address writing port of the target unit.
Press the SET button on the ARW-04 or ARW-03 to write an address value.
When writing is successful, a beep sounds.
When "ERR" is displayed, readjust the optical axis to press the SET button again.
■Reading
Set the ARW-04 or ARW-03 to the reading mode in advance.
Point the optical axis window of the ARW-RH to the address writing port of the target unit.
Press the SET button on the ARW-04 or ARW-03 to write an address value.
When writing is successful, a beep sounds.
When "ERR" is displayed, readjust the optical axis to press the SET button again.
①
②
To RH connector
-ARWRH 2/6-
ARW-RH
SET button
* This gure shows an ARW-04 as an example.
POWER