- ページ 4

ミシン Duerkopp Adler 743-221のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Duerkopp Adler 743-221 12 ページ。

2. General Information and Transport Safeguards

3. Installation of the Sewing Unit

ATTENTION !

The sewing unit may only be installed by trained, skilled personnel.

All work on the electrical equipment of the sewing unit may only be

conducted by electricians or appropriately instructed persons.

The mains plug must be pulled.

The operating instructions for the sewing drive and the step motor

drive are to be observed.

Before installation of the sewing unit the following transport

safeguards are to be removed:

–

The securing band from the sewing drive.

–

The angles which on the wooden pallet lock over the feet of the

frame.

–

Securing bands of the smoother and bundle clamp.

–

Securing bands of the placement table.

The sewing unit has 4 castors for in-house transport.

ATTENTION !

During operation of the sewing unit the castors must be turned in so

far that the unit rests firmly on its feet.

–

For transport turn the setting screws 1 to 4 to the left.

The feet must have enough floor clearance for transport.

–

Transport the sewing unit.

–

To lower the sewing unit turn the setting screws 1 to 4 to the right.

The feet must rest firmly on the floor.