- ページ 6

配管製品 Anzzi SD-AZ03-01のPDF インストレーション＆ケアマニュアルをオンラインで閲覧またはダウンロードできます。Anzzi SD-AZ03-01 10 ページ。 Shower door

5. Place the Stationary glass panel (01) and Return

glass panel (03) back into the designated position,

assemble the Wall brackets (14) and tighten the bolts.

See Fig. 5 for details.

6. Locate the Support bar (04).

Adjust the bar to a proper position on the glass

and the wall. Level it horizontally. Hold it firmly and

outline the bracket's position on the wall. Remove

the Support bar and detach the wall bracket from

it. Place the wall bracket against its outlined

position on the wall and mark the drilling hole.

Drill the hole using Ø 5/16" drill bit, insert the

Wall anchor (07) and fasten the wall bracket to

the wall with the Big head Screw ST4.2×55 (09).

Attach the Support bar to the wall as shown on

Fig. 6.5 and tighten the set screws and the glass

holding screw to secure the glass.

See Fig. 6 and Fig. 7 for details.

Fig

. 5

Ø 5/16"

Fig

. 6