Anzzi SD-AZ03-01 설치 및 관리 매뉴얼 - 페이지 6

{카테고리_이름} Anzzi SD-AZ03-01에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi SD-AZ03-01 10 페이지. Shower door

5. Place the Stationary glass panel (01) and Return

glass panel (03) back into the designated position,

assemble the Wall brackets (14) and tighten the bolts.

See Fig. 5 for details.

6. Locate the Support bar (04).

Adjust the bar to a proper position on the glass

and the wall. Level it horizontally. Hold it firmly and

outline the bracket's position on the wall. Remove

the Support bar and detach the wall bracket from

it. Place the wall bracket against its outlined

position on the wall and mark the drilling hole.

Drill the hole using Ø 5/16" drill bit, insert the

Wall anchor (07) and fasten the wall bracket to

the wall with the Big head Screw ST4.2×55 (09).

Attach the Support bar to the wall as shown on

Fig. 6.5 and tighten the set screws and the glass

holding screw to secure the glass.

See Fig. 6 and Fig. 7 for details.

Fig

. 5

Ø 5/16"

Fig

. 6