- ページ 17
セキュリティシステム Duevi PEPEROSSOのPDF 設置および使用マニュアルをオンラインで閲覧またはダウンロードできます。Duevi PEPEROSSO 19 ページ。 Dissuader with nebulization irritating gas
ページを印刷するSubstitution of spray cans
After a nebulisation or at least every three years (even if no nebulisation) it's necessary to substitute the
spray cans (the expiry date is stated on the bottom of the container).
FOLLOW STRICTLY AND IN PRECISE ORDER THE FOLLOWING INSTALLATION
INSTRUCTIONS, OTHERWISE MAY RESULT AN ACCIDENTAL NEBULISATION OF
HARMFUL GAS
After a nebulisation:
1.
Deactivate the control panel (IN1 and IN2 to +12 V
remove the cover of Peperosso
2.
Enable Peperosso removing the positive +12 V
3.
Press the K1 button to bring the plunger to rest
4.
Block Peperosso giving the positive +12 V
5.
Unplug the CN2 connector which power the motor, in this way the plunger is mechanically
blocked
6.
Substitute the spray cans
7.
Plug in the CN2 motor connector
8.
Close the cover
Substitution for maintenance:
1.
Deactivate the control panel (IN1 and IN2 to +12 V
remove the cover of Peperosso
2.
Block Peperosso giving the positive +12 V
3.
Unplug the CN2 connector which power the motor, in this way the plunger is mechanically
blocked
4.
Substitute the spray cans
5.
Plug in the CN2 motor connector
6.
Close the cover
) with tamper control excluded, then
from IN1
to IN1
) with tamper control excluded, then
to IN1
17