- ページ 2

セキュリティセンサー Duevi DIRRV2 868のPDF 設置および使用マニュアルをオンラインで閲覧またはダウンロードできます。Duevi DIRRV2 868 4 ページ。 Infrared wireless detector

2. Open the detector, remove the cover and unscrew the battery bracket

3. Make a 7 mm hole on frame and fix the detector to the joint, aligning the joint with the frame of the sensor and pass the cable inside:

4. Unscrew the electronic board from its place and pass the anti-removal switch cable inside the hole for cable (there is the battery cable) as in next figure:

Anti-removal cable: connect to

TMP.BR terminal

The anti-removal cable must be

maintained under the electronic board

5. Mount the electronic board and the battery bracket in their place. Connect the anti-removal tamper cable to the TMP.BR terminal. Activate the

detector (settings and battery) then close the cover. The installation is complete.

Hole for cables: battery and anti-

removal tamper