Duevi DIRRV2 868 Installation And Use Manual - Page 2

Browse online or download pdf Installation And Use Manual for Security Sensors Duevi DIRRV2 868. Duevi DIRRV2 868 4 pages. Infrared wireless detector

Print Page

2. Open the detector, remove the cover and unscrew the battery bracket

3. Make a 7 mm hole on frame and fix the detector to the joint, aligning the joint with the frame of the sensor and pass the cable inside:

4. Unscrew the electronic board from its place and pass the anti-removal switch cable inside the hole for cable (there is the battery cable) as in next figure:

Anti-removal cable: connect to

TMP.BR terminal

The anti-removal cable must be

maintained under the electronic board

5. Mount the electronic board and the battery bracket in their place. Connect the anti-removal tamper cable to the TMP.BR terminal. Activate the

detector (settings and battery) then close the cover. The installation is complete.

Hole for cables: battery and anti-

removal tamper