自動車アクセサリー Addictive Desert Designs Venom Side StepsのPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Addictive Desert Designs Venom Side Steps 2 ページ。 2010-2014 ford raptor
ページを印刷する
1. Disconnect the negative terminal on the battery. With the vehicle on level ground and the
emergency brake set.
2. You will need the following tools:
a. 13MM Socket and Ratchet
b. 3/16 Allen Wrench
3. Hardware required:
a. 16 – 13mm Factory Bolts will be re-used for the installation
4. Hardware provided:
a. 16 – 5/16 x 18 Button Head Bolts
b. 16 – 5/16 x 18 Nut Clips
c. 16 – 5/16 Washers
** A.D.D. provides hardware in case there is no factory hardware available. You may use either set of
hardware to install your new side steps.
1.
Remove factory Side Steps by removing the 16 – 13mm bolts (8 per side). Keep the Bolts as they
will be reused. Use the A.D.D hardware if no factory side step hardware available.
–