Addictive Desert Designs Venom Side Steps 설치 지침
{카테고리_이름} Addictive Desert Designs Venom Side Steps에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Addictive Desert Designs Venom Side Steps 2 페이지. 2010-2014 ford raptor
페이지 인쇄
1. Disconnect the negative terminal on the battery. With the vehicle on level ground and the
emergency brake set.
2. You will need the following tools:
a. 13MM Socket and Ratchet
b. 3/16 Allen Wrench
3. Hardware required:
a. 16 – 13mm Factory Bolts will be re-used for the installation
4. Hardware provided:
a. 16 – 5/16 x 18 Button Head Bolts
b. 16 – 5/16 x 18 Nut Clips
c. 16 – 5/16 Washers
** A.D.D. provides hardware in case there is no factory hardware available. You may use either set of
hardware to install your new side steps.
1.
Remove factory Side Steps by removing the 16 – 13mm bolts (8 per side). Keep the Bolts as they
will be reused. Use the A.D.D hardware if no factory side step hardware available.
–