- ページ 11

航空機 airwave Air Boy nano4のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。airwave Air Boy nano4 20 ページ。

OPERATING INSTRUCTIONS

4. Air Cushion production

After you have inserted the film and set the parameters (page 6) temperature, air volume,

speed according to the type of film - press the "START" button to start film production and

check the air filling quantity and sealing result at the same time. If necessary, adjust the

temperature and air volume according to the actual situation (room temperature etc. can

be determining)

5. Break

The machine will stop automatically after running for the preset time, or you can manually

press "STOP" button to stop working when the machine running. The remaining time will

not be reset, only after turning off the machine.

Adjustments with control panel

1. Speed adjustment

After pressing START machine is working with the last preset data. Pressing SPEED you

choose the different speeds V1 – V4. Please adjust the speed according to page 6.

2. Temperature adjustment (T)

Temperature setting is on the left side of panel. Pressing the "+" button increases the

temperature; pressing the "-" button decreases. Press one time means increase or

decrease 1 level. Continuous pressing rapidly increases or decreases. (Please decrease if

there are holes in the sealing bags; please increase if sealing is not very strong)

3. Air volume adjustment (F)

Air volume setting is on the right side of panel. Pressing the "+" button increases the air

volume; pressing the "-" button decreases. Press one time means increase or decrease 1

level.

Speed, temperature (T) and air volume (F) can be changed during the film production.