- ページ 10
DCドライブ Danfoss Holip HLP-V SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Danfoss Holip HLP-V Series 10 ページ。
ページを印刷する
Cable, cross-sections and connectors:
Max. cable cross-section for 24 V external DC supply
- HLP-V 4015-4100
- HLP-V 4125-4550
Max. cross-section for control cables
Max. cross-section for serial communication
Connectors are for use of both copper and aluminium cables, unless other is specified.
Accuracy of display readout (parameters 009-012):
Motor current [6] 0-140% load
Torque % [7], -100 - 140% load
Output [8], power HP [9], 0-90% load
Control characteristics:
Frequency range
Resolution on output frequency
System response time
Speed, control range (open-loop)
Speed, control range (closed-loop)
Speed, accuracy (open-loop)
Speed, accuracy (closed-loop)
Torque control accuracy (open-loop
Torque control accuracy (speed feedback)
All control characteristics are based on a 4-pole asynchronous motor
Externals:
Enclosure (dependent on power size)
Vibration test
Max. relative humidity
Max. relative humidity
Aggresive environment
Aggresive environment
Ambient temperature Chassis, NEMA 1(high overload torque 160%)
Ambient temperature Chassis, NEMA 1(normal overload torque 110%)
Ambient temperature NEMA 12 (high overload torque 160%)
Ambient temperature NEMA 12 (normal overload torque 110%)
Derating for high ambient temperature, see the Design Guide
HLP-V Series
Max. error: ±2.0% of rated output current
0-150 rpm: max. error ± 20% of rated torque
0.7 g RMS 18-1000 Hz random. 3 directions for 2 hours
Max. 45°C (24-hour average max. 40°C)
Max. 40°C (24-hour average max. 35°C)
Max. 40°C (24-hour average max. 35°C)
Max. 40°C (24-hour average max. 35°C)
4 mm
2
/10 AWG
5 mm
2
/12 AWG
1.5 mm
2
/16 AWG
2
1.5 mm
/16 AWG
Max. error: ±5% of rated motor size
Max. error: ±5% of rated output
0 - 1000 Hz
±0.003 Hz
1:100 of synchro. speed
1:1000 of synchro. speed
< 1500 rpm: max. error ± 7.5 rpm
< 1500 rpm: max. error ± 1.5 rpm
Max. error ± 5% of rated torque
Chassis, Nema1, Nema12
93 % for storage/transport
95 % non condensing for operation
Uncoated class 3C2
Coated class 3C3
3 msec
9