- ページ 6

ヘッドフォン 3SIXT 3S-0953のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3SIXT 3S-0953 12 ページ。 Bt studio buds with wireless technology

PAIRING TO MOBILE PHONES/TABLETS/COMPUTERS

Turn on 3SIXT Studio Buds by pulling the magnetic ear buds apart (7).

There will be a voice prompt "Power On" and a long beep. The LED light

on the in line controller will be rapid flashing red/blue

Activating Bluetooth® on your device:

1) Go to your device Bluetooth® settings and scan for new

Bluetooth® devices;

2) Search for 3SIXT 3S-0953 and once found, click on it to pair with

3SIXT Studio Buds;

3) If your device asks for a pairing code, please enter '0000' and

confirm it;

4) You will hear the voice prompt "Your Headset is Connected" and

a short beep;

5) The LED light on the controller turns to solid blue;

LOW POWER WARNING

3SIXT Studio Buds will make a voice prompt to remind you to charge if the

battery is low (battery <10%). You will need to charge 3SIXT Studio Buds

regularly to maintain a full charge.

CHARGING 3SIXT STUDIO BUDS

1) Connect the supplied Micro USB Charge Cable to a USB 5V 1A charger.

2) Carefully remove the dust cover from the Micro USB charging

port (5) on 3SIXT Studio Buds in line controller. The dust cover is

tethered to the in line controller for ease of use.

3) Insert the the micro USB cable connector into the Micro USB

charging port (5) on the in line controller to commence the

charging.

4) When 3SIXT Studio Buds are charging the red LED light (8) will

illuminate to indicate that 3SIXT Studio Buds are in charging

mode.

5) Once 3SIXT Studio Buds battery is full, the LED Light (8) will turn

solid Blue.

6) Disconnect the Micro USB cable from 3SIXT Studio Buds &

carefully replace the dust cap on the in line controller.