3SIXT 3S-0953 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Навушники 3SIXT 3S-0953. 3SIXT 3S-0953 12 сторінок. Bt studio buds with wireless technology

3SIXT 3S-0953 Посібник користувача
PAIRING TO MOBILE PHONES/TABLETS/COMPUTERS
Turn on 3SIXT Studio Buds by pulling the magnetic ear buds apart (7).
There will be a voice prompt "Power On" and a long beep. The LED light
on the in line controller will be rapid flashing red/blue
Activating Bluetooth® on your device:
1) Go to your device Bluetooth® settings and scan for new
Bluetooth® devices;
2) Search for 3SIXT 3S-0953 and once found, click on it to pair with
3SIXT Studio Buds;
3) If your device asks for a pairing code, please enter '0000' and
confirm it;
4) You will hear the voice prompt "Your Headset is Connected" and
a short beep;
5) The LED light on the controller turns to solid blue;

LOW POWER WARNING

3SIXT Studio Buds will make a voice prompt to remind you to charge if the
battery is low (battery <10%). You will need to charge 3SIXT Studio Buds
regularly to maintain a full charge.
CHARGING 3SIXT STUDIO BUDS
1) Connect the supplied Micro USB Charge Cable to a USB 5V 1A charger.
2) Carefully remove the dust cover from the Micro USB charging
port (5) on 3SIXT Studio Buds in line controller. The dust cover is
tethered to the in line controller for ease of use.
3) Insert the the micro USB cable connector into the Micro USB
charging port (5) on the in line controller to commence the
charging.
4) When 3SIXT Studio Buds are charging the red LED light (8) will
illuminate to indicate that 3SIXT Studio Buds are in charging
mode.
5) Once 3SIXT Studio Buds battery is full, the LED Light (8) will turn
solid Blue.
6) Disconnect the Micro USB cable from 3SIXT Studio Buds &
carefully replace the dust cap on the in line controller.
6