- ページ 5

DJ機材 Aolait AL350BWのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aolait AL350BW 12 ページ。 350w waterproof beam light

Make sure that the available voltage is not higher than stated at the end of this

manual.

Make sure the power cord is never crimped or damaged by sharp edges. If

this would be the case, replacement of the cable must be done by an

authorized dealer.

Always disconnect from the mains, when the device is not in use or before

cleaning it. Only handle the power cord by the plug. Never pull out the plug by

tugging the power cord.

During initial start-up some smoke or smell may arise. This is a

normal

process and does not necessarily mean that the device is defective, it should

decrease gradually.

Please don't project the beam onto combustible substances.

If the external flexible cable or cord of this luminaire is damaged, it shall be

exclusively replaced by the manufacturer or his service agent or a similar

qualified person in order to avoid a hazard.

CAUTION!

Never touch the device during operation!

The housing may heat up!

CAUTION!

Never look directly into the light source,

As sensitive persons may suffer an epileptic shock.

Please be aware that damages caused by manual modifications to be the device

are not subject to warranty. Keep away from children and non-professionals.

INSTALLATION INSTRUCTIONS

CAUTION!

Only install the lamp with the device unplugged from the mains.

CAUTION!

The lamp has to be replaced when it is damaged or deformed.

Before replacing the lamp let the lamp cool down, because during operation,

the lamp can reach very high temperature.

During the installation of halogen lamps do not touch the glass bulbs bare

handed. Always use a cloth to handle the lamps during insertion and removal.

Do not install lamps with a higher wattage. They generate higher temperatures

than which the device was designed for.