- ページ 6

DJ機材 Aolait AL350BWのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aolait AL350BW 12 ページ。 350w waterproof beam light

CLEANING AND MAINTENANCE

1. During long periods of non-use, disconnect the unit's main power.

2. It should be installed in a well-ventilated place, at a distance of 50

centimeters or more with the walls. At the same time, please check if the fan

and ventilation holes are unobstructed.

The following points have to be considered during the inspection

1) All screws for installing the devices or parts of the device have to be tightly

connected and must not be corroded.

2) There must not be any deformations on the housing, color lenses.

Fixations and installations spots

3) Mechanically moved parts must not show any traces of wearing and must

not rotate with unbalances.

4) The electric power supply cables must not show any damage, material fatigue

or sediments. Further instructions depending on the installation spot and

usage have to be adhered by a skilled installer and any safety problems have

to be removed.

Disconnect from mains before starting maintenance

operation!

In order to make the lights in good condition and extend the life time, we

suggest a regular cleaning to the lights.

1) Clean the inside and outside lens each week to avoid the weakness of the

lights due to accumulation of dust.

2) Clean the fan each week.

3) A detailed electric check by approved electrical engineer each three month,

make sure that the circuit contacts are in good condition, prevent the poor

contact of circuit from overheating.

We recommend a frequent cleaning of the device. Please use a moist, lint-free

cloth. Never use alcohol or solvents.

There are no serviceable parts inside the device except for the lamp. Please

refer to the instructions under "Installation instructions".

Should you need any spare parts, please order genuine parts from your local

dealer.

CAUTION!