ページを印刷するin the display.
• When releasing the
returns to showing the actual room temperature
.
This temperature change is only temporary and
will be maintained only until the next programmed
setting!
7. Choosing room temperature
control or both room and floor
temperature control
Turn OFF the thermostat by pressing
• Press
Fig. 1 and
display will show 01.
• Press
01=room temperature control, only with room
sensor, no floor sensor, check and setting only room
temperature.
02=both room and floor temperature control, with
room sensor and floor sensor, check and setting room
temperature and maximum floor temperature limit.
Factory setting is 01.
10
VI.CU.C2.02
Instruction FH-CWP Thermostat
or
Fig. 1 to adjust desired controltype.
Produced by Danfoss Floor Heating Hydronics 05.2011
Fig. 1 the display
Fig. 1 for 10 seconds. The
Fig. 1.