Danfoss FH-CWP Kullanım Kılavuzu - Sayfa 10

Termostat Danfoss FH-CWP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Danfoss FH-CWP 20 sayfaları.

in the display.

• When releasing the

returns to showing the actual room temperature

This temperature change is only temporary and

will be maintained only until the next programmed

setting!

7. Choosing room temperature

control or both room and floor

temperature control

Turn OFF the thermostat by pressing

• Press

Fig. 1 and

display will show 01.

• Press

01=room temperature control, only with room

sensor, no floor sensor, check and setting only room

temperature.

02=both room and floor temperature control, with

room sensor and floor sensor, check and setting room

temperature and maximum floor temperature limit.

Factory setting is 01.

VI.CU.C2.02

Instruction FH-CWP Thermostat

Fig. 1 to adjust desired controltype.

Produced by Danfoss Floor Heating Hydronics 05.2011

Fig. 1 the display

Fig. 1 for 10 seconds. The

Fig. 1.