ページを印刷する4.2. Readjusting the brace
Once the nail has adapted the form of the brace, the brace may
become loose and may fall off. If that happens, it is recommended to
remove the brace and re-adjust it proximally to the previous
position.
Before re-adjusting the brace must be disinfected in an immersion bath using a
disinfectant generally acknowledged by your local medical association for hygiene and
microbiology
(i.e.
concentration and application times on the package or in the patient information
leaflets. Please remove any adhering contaminations and rinse the brace with clear
water after disinfection.
Please place the two brace sides on the nail again with a new loop as
described in chapters 3.4-3.8:
Hang the two sides into the nail fold again (see 3.4. & 3.5.)
Contract the sides with a new loop (see 3.6.)
Cut off any excess loop wire short – 2 threads must be maintained
– then seal it (see 3.7. & 3.8.)
®
Lysetol
Med).
Always
follow
18
the
instructions
regarding