ページを印刷する4. Remove and re-adjust the brace
4.1. Removing the brace
If you do not want to re-adjust the brace, you may cut off the wire at
any desired place with the side-cutting nippers and remove the brace
parts.
However, if you want to re-adjust the brace, the brace sides must
remain intact. That is why the brace should be cut in the middle of
the loop:
For sealing removal, use the side-cutting nippers to separate the
sealing from the nail plate (Picture 20).
You can cut through the plastic drop with the loop from the side.
The remaining plastic nail material on the brace sides can be
removed from the brace wire with flat pliers similar to using a
nutcracker.
Picture 20
Picture 21
17