3TO BRACE 지침 세트 - 페이지 17

{카테고리_이름} 3TO BRACE에 대한 지침 세트을 온라인으로 검색하거나 PDF를 다운로드하세요. 3TO BRACE 20 페이지. Spange

4. Remove and re-adjust the brace

4.1. Removing the brace

If you do not want to re-adjust the brace, you may cut off the wire at

any desired place with the side-cutting nippers and remove the brace

parts.

However, if you want to re-adjust the brace, the brace sides must

remain intact. That is why the brace should be cut in the middle of

the loop:

For sealing removal, use the side-cutting nippers to separate the

sealing from the nail plate (Picture 20).

You can cut through the plastic drop with the loop from the side.

The remaining plastic nail material on the brace sides can be

removed from the brace wire with flat pliers similar to using a

nutcracker.

Picture 20

Picture 21