3TO BRACE Набір інструкцій - Сторінка 17

Переглянути онлайн або завантажити pdf Набір інструкцій для Медичне обладнання 3TO BRACE. 3TO BRACE 20 сторінок. Spange

4. Remove and re-adjust the brace

4.1. Removing the brace

If you do not want to re-adjust the brace, you may cut off the wire at

any desired place with the side-cutting nippers and remove the brace

parts.

However, if you want to re-adjust the brace, the brace sides must

remain intact. That is why the brace should be cut in the middle of

the loop:

For sealing removal, use the side-cutting nippers to separate the

sealing from the nail plate (Picture 20).

You can cut through the plastic drop with the loop from the side.

The remaining plastic nail material on the brace sides can be

removed from the brace wire with flat pliers similar to using a

nutcracker.

Picture 20

Picture 21