- ページ 5

水ポンプ Danfoss APP 11-13のPDF 分解と組み立ての説明をオンラインで閲覧またはダウンロードできます。Danfoss APP 11-13 18 ページ。 Changing pistons
Danfoss APP 11-13 にも：取扱説明書 (8 ページ)

Instruction

Disassembling and assembling APP 11-13 and APP 16-22

Using the 13 mm combination wrench,

remove all the bolts on the mounting

flange except the three shown in the

picture in item 9.

WARNING: Do not loosen the two screws

keeping the swash plate in place.

10.

Screw the eye bolt in the M8 hole in the

middle of the flange. Pull it straight

upwards.

12.

Remove the pistons one by one. Be careful

not to scratch pistons. Tilt the retainer plate

to horizontal for easy removal of pistons, if

required.

WARNING: DO NOT USE ANY TOOLS.

180R9228 / 521B1181 / DKCFN.PI.013.A2.02 / 10.2013

Unscrew the remaining three bolts. Turn

each bolt one round at the time to make

sure that the flange is removed as straight

upward as possible.

11. Swash plate must be placed so that its

surface is not scratched. For further dis-

assembling of swash plate, see page 12.

13.

Remove the retainer plate.

Note: As the retainer guide is not

attached to the retainer plate, it might fall

out.