- ページ 6
ツール Duobond RL-eezのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Duobond RL-eez 9 ページ。 Windshield removal
ページを印刷する
Now connect the 12V output to a 12V power supply with a minimum of 8A rated power.
By operating the remote control, the wire will now be winched and cut through the polyurethane adhesive.
Always position the nylon cutting wire around the suction cup with pulley at a correct angle relative to the
winch. The cutting angle changes during cutting. If there is no longer any sharp angle,
the suction cup with pulley must be repositioned so that the correct angle is created again.
After use, store the complete RL-eez system clean and dry in the supplied case.
6 of 9