- ページ 7
コンピュータ・ハードウェア addlink SPIDER N4のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。addlink SPIDER N4 9 ページ。 Ddr4 so-dimm
ページを印刷するSPIDER N4
DDR4 SO-DIMM
Installation
Guide
Introduction
Important Notice
Installation
Test it
Troubleshooting
Close Your System
Troubleshooting
If you have trouble with your new RAM, check these things first.
1. Double check your power code.
2. Check the module. Did both side clips snap to hold the module
firmly in place?
3. Check the cables and wires inside your laptop. Make sure all
the cables are firmly in their sockets.
4. Remove and reinstall the modules into the memory slot again.
5. Consult your notebook specification & installation guide. Or go
to notebook product support homepage to check currently
installed memory specification (amount, DRAM type, maximum
supported)
6. Enter BIOS and press "F5" or "F9", to help you load the default
setting for BIOS.
7. Reset BIOS by removing and replacing the CMOS battery or
through CLR_Jumper (Please follow the instruction of your
motherboard).
8. Update your BIOS.