- ページ 6
計測機器 Free The Tone PHA-1のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Free The Tone PHA-1 12 ページ。 Phase analyzer
Free The Tone PHA-1 にも： オーナーズマニュアル (6 ページ)
ページを印刷する
Display Contents
< Display Screen in Test Mode >
Test Signal's Waveform
Incoming Signal's Waveform
Adjusting Signal to be Measured
If signal waveform is too large to be shown entirely in
Display or Display shows "Over-Level"...
To show the waveform properly: Press the RANGE switch to
increase the range level value shown in the right top corner of
the Display.
Or if measuring the phase of the amplifier with speaker,
increase the distance between the speaker and the PHA-1 or
lower the amplifier's volume.
6
Selected Input
Current Range Level
Selected Measurement Mode
< Display Screen in Usual Operation >
Input or Output Waveform
If waveform is too small to see or Display shows "Low-
Level"...
To show the waveform properly: Press the RANGE switch to
decrease the range level value shown in the right top corner of
the Display.
Or if measuring the phase of the amplifier with speaker,
decrease the distance between the speaker and the PHA-1 or
raise the amplifier's volume.
Selected Input
Current Range Level