- ページ 4
スピーカー AudioEngine A2のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。AudioEngine A2 6 ページ。 Audioengine speaker user manual
AudioEngine A2 にも: 仕様書 (2 ページ)
Box Contents
Included with the speakers:
Power supply
Speaker cable (16AWG), 2 meters (~6.5 feet)
⁄ " mini-jack audio cable, 2 meters (~6.5 feet)
⁄ " mini-jack audio cable, 20 cm (~8 inches)
Drawstring power supply bag
Drawstring cable bag
DrawString speaker bag (2)
Setup Guide
4
audioengine 2 setup guide
Connecting your system
Step 1– Connecting the Speaker Wire
Connect the
corresponding terminals on the right speaker using the included speaker
wire. Be sure to match the gold-colored side of the speaker wire with the
RED
INPUT:
100-240V~ 50/60Hz 1.8A
+
–
OUTPUT:
±
17.5V
2.0A
each speaker.
Assembled in China
As the Audioengine 5 speaker system is self-powered, do not connect the
speaker terminals to the speaker outputs of a stereo receiver.
Detailed Procedure:
1 Use your thumb and nger to unscrew the binding post connectors.
2 Insert each speaker wire into the holes on the side of binding post
connectors.
3 Retighten the binding posts with your ngers.
4 The stripped portion of the wire should be secured rmly in each
connector.
Repeat the procedure to connect the other end of the speaker wire to the
other speaker. Make sure that none of the speaker wire strands have come
in contact with an adjoining terminal.
RED
(+) and BLACK (-) terminals from the left speaker to the
(+) terminals and the silver-colored side to the BLACK (-) terminals on
audioengine 2 setup guide
5