AudioEngine A2 설정 매뉴얼 - 페이지 4

{카테고리_이름} AudioEngine A2에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioEngine A2 6 페이지. Audioengine speaker user manual
AudioEngine A2에 대해서도 마찬가지입니다: 사양 시트 (2 페이지)

페이지 인쇄

Box Contents

Included with the speakers:

Power supply

Speaker cable (16AWG), 2 meters (~6.5 feet)

⁄ " mini-jack audio cable, 2 meters (~6.5 feet)

⁄ " mini-jack audio cable, 20 cm (~8 inches)

Drawstring power supply bag

Drawstring cable bag

DrawString speaker bag (2)

Setup Guide

audioengine 2 setup guide

Connecting your system

Step 1– Connecting the Speaker Wire

Connect the

corresponding terminals on the right speaker using the included speaker

wire. Be sure to match the gold-colored side of the speaker wire with the

RED

INPUT:

100-240V~ 50/60Hz 1.8A

–

OUTPUT:

17.5V

2.0A

each speaker.

Assembled in China

As the Audioengine 5 speaker system is self-powered, do not connect the

speaker terminals to the speaker outputs of a stereo receiver.

Detailed Procedure:

1 Use your thumb and nger to unscrew the binding post connectors.

2 Insert each speaker wire into the holes on the side of binding post

connectors.

3 Retighten the binding posts with your ngers.

4 The stripped portion of the wire should be secured rmly in each

connector.

Repeat the procedure to connect the other end of the speaker wire to the

other speaker. Make sure that none of the speaker wire strands have come

in contact with an adjoining terminal.

RED

(+) and BLACK (-) terminals from the left speaker to the

(+) terminals and the silver-colored side to the BLACK (-) terminals on

audioengine 2 setup guide