- ページ 14
オーブン Daniela DAN90ABOのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Daniela DAN90ABO 15 ページ。
ページを印刷するInstallation
The appliance is usually supplied fitted with a power cord and 3 pinplug.
Install the cooker so that the plug is easily accessible.Plug the 3-pin plug
into a properly earthed, 15A general purpose power outlet. The supply cable
should be positioned so that it does not reach a temperature of more than 75
degrees along its entire length.
If the appliance is not supplied with a plug or if connecting the cable directly to
the mains, connection to the electricity supply must be made by an authorised
person in accordance with the Wiring Rules AS/NZS3000. The installation
must include a suitable isolating switch with a minimum contact opening of
3mm between the appliance and the mains. The isolating switch should be
sized according to the load on the data label and should comply with current
regulations (the earth wire should not be interrupted by the circuit breaker).
Before making the connection check that:
·The switch, wiring and electrical system can support the appliance load (see
data plate);
·The power supply system has an efficient earthing connection which complies
with the provisions of current regulations.
·The power outlet or omnipoar circuit-breaker must be easily accessible once
the cooker has been installed.
Replacing the power supply cable
If the supply cord or plug is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid hazard.
Technical Data
D A N I E L A
Pg 26
P | 0 2 9 6 0 4 1 2 2 6 E | s a l e s @ d a n i e l a a p p l i a n c e s . c o m . a u | W d a n i e l a a p p l i a n c e s . c o m . a u
Service Information
It is a warranty requirement that proof of purchase must be provided when booking
a service call. Please be advised that without this proof of purchase, your warranty
may not be honoured.
All warranty will be voided, if not installed by a licensed technician or tradesman.
Please fill out the form below for future reference
Technician/Tradesman who installed
Company Name: _________________________________________________
Licence Number: _________________________________________________
Date of installation: _______________________________________________
NOTE: Model number and details are to be recorded below for future reference.
Please have the following information ready before calling our customer care
team.
Your order/appliance details:
Full name: _____________________________________________________
Order/Invoice Number: ____________________________________________
Place of purcahse: _______________________________________________
Oven Serial number ______________________________________________
U S E R
M A N U A L
D A N 9 0 A B O
D A N I E L A
P | 0 2 9 6 0 4 1 2 2 6 E | s a l e s @ d a n i e l a a p p l i a n c e s . c o m . a u | W d a n i e l a a p p l i a n c e s . c o m . a u
U S E R
M A N U A L
D A N 9 0 A B O
Pg 27