Daniela DAN90ABO User Manual - Page 14

Browse online or download pdf User Manual for Oven Daniela DAN90ABO. Daniela DAN90ABO 15 pages.

Print Page

Installation

The appliance is usually supplied fitted with a power cord and 3 pinplug.

Install the cooker so that the plug is easily accessible.Plug the 3-pin plug

into a properly earthed, 15A general purpose power outlet. The supply cable

should be positioned so that it does not reach a temperature of more than 75

degrees along its entire length.

If the appliance is not supplied with a plug or if connecting the cable directly to

the mains, connection to the electricity supply must be made by an authorised

person in accordance with the Wiring Rules AS/NZS3000. The installation

must include a suitable isolating switch with a minimum contact opening of

3mm between the appliance and the mains. The isolating switch should be

sized according to the load on the data label and should comply with current

regulations (the earth wire should not be interrupted by the circuit breaker).

Before making the connection check that:

·The switch, wiring and electrical system can support the appliance load (see

data plate);

·The power supply system has an efficient earthing connection which complies

with the provisions of current regulations.

·The power outlet or omnipoar circuit-breaker must be easily accessible once

the cooker has been installed.

Replacing the power supply cable

If the supply cord or plug is damaged, it must be replaced by the manufacturer

or its service agent or a similarly qualified person in order to avoid hazard.

Technical Data

D A N I E L A

Pg 26

P | 0 2 9 6 0 4 1 2 2 6 E | s a l e s @ d a n i e l a a p p l i a n c e s . c o m . a u | W d a n i e l a a p p l i a n c e s . c o m . a u

Service Information

It is a warranty requirement that proof of purchase must be provided when booking

a service call. Please be advised that without this proof of purchase, your warranty

may not be honoured.

All warranty will be voided, if not installed by a licensed technician or tradesman.

Please fill out the form below for future reference

Technician/Tradesman who installed

Company Name: _________________________________________________

Licence Number: _________________________________________________

Date of installation: _______________________________________________

NOTE: Model number and details are to be recorded below for future reference.

Please have the following information ready before calling our customer care

team.

Your order/appliance details:

Full name: _____________________________________________________

Order/Invoice Number: ____________________________________________

Place of purcahse: _______________________________________________

Oven Serial number ______________________________________________

U S E R

M A N U A L

D A N 9 0 A B O

D A N I E L A

P | 0 2 9 6 0 4 1 2 2 6 E | s a l e s @ d a n i e l a a p p l i a n c e s . c o m . a u | W d a n i e l a a p p l i a n c e s . c o m . a u

U S E R

M A N U A L

D A N 9 0 A B O

Pg 27