- ページ 8

ゲートオープナー DANIU RTU5024のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DANIU RTU5024 13 ページ。 Gsm gate opener gsm remote switch

www.daniu-iot.com

the input is in ENGLISH INPUT METHOD and CAPS LOCK.

12. The SMS commands that you will certainly use in the GSM Gate Opener are the following:

6.1 Setup New Password

RTU5035

pwd#PWDnewpassword#PWDnewpassword#

if successful, the unit will return:

For example, the original password is 1234, you want change it to 6666, then you can send the

command below:

1234#PWD6666#PWD6666#

Tips:

1.The pwd in the commands is means the password, when you use it, please in stand of it by

the digital number, the capital letters PWD is the command letter, use PWD directly.

2.Remember that commands must be CAPITAL Lock LETTERS. It is PWD not pwd, CAP not Cap

etc. Don't add spaces or any other character. When input punctuation symbol #, must be

under ENGLISH or DIGITAL input method. Not support other input method.

6.2 Setup Authorized number

pwd#TELAuthorized Number#Serial Number#

E.g.: if you want to setup 13500001111 as the first user number, and the password is 1234,then you

can send

1234#TEL004413500001111#001#

0044 is country code, will return:

Tips:

1. the authorized number means the one who can dial the RTU5024 unit to open it.

2.We strongly recommend that the serial number of 01 is cellphone number, because of the

Relay action message only send to the first position number;

3. The Serial Number is the position to store the authorized number, from 001~200.

6.3 Inquiry the Serial Number's Authorized number

pwd#TELSerial Number？

E.g.: If you want to know the authorized number at position 2, and the password is 1234,then you can

send

1234#TEL002?

6.4 Remove the Authorized Number

New

Password:xxxx.

001:004413500001111

002: Empty

003: Empty

004: Empty

005: Empty

to check it.

to the RTU5024 unit. After the RTU5024 received, the

- 6 -