- ページ 2

スイッチ DANLERS CEFL PIRのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DANLERS CEFL PIR 2 ページ。 Ceiling flush mounted pir occupancy switch
DANLERS CEFL PIR にも：インストレーション・ノート (15 ページ)

ページを印刷する

CEFL PIR

Ceiling Flush Mounted PIR Occupancy Switch

Input: 220-240 Vac 50Hz

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT

Note 1: Optional manual

wall switch for overriding off.

230 VAC

Note 1: Optional manual

DIAGRAM D (WIRING A SINGLE PIR)

wall switch for overriding off.

230 VAC

INPUT:

Voltage:

220 - 240Vac

Frequency:

50Hz

Max. mains current:

0.05A

LOADING:

CEFL PIR

Resistive loads:

6 amps (1500W)

Fluorescent:

6 amps (1500W)

LED Drivers and LED

6 amps (1500W)

lamps and fittings:

Electronic and wire

3 amps (1500W)

wound transformer:

CFL and 2D lamps:

2 amps (500W)

Fans:

1 amp (250W)

2W resistive, suitable

for most energy

Minimum load

saving lamps, LEDs

and emergency

fittings.

OPERATING CONDITIONS:

The temperature difference between the

detection target and the background must

be at least 4 °C.

Ambient

-20... +40 °C (lout

temperature:

0.05 A)

PRECAUTIONS AND WARRANTY

This product conforms to BS EN 60669-2-1 and

BS EN 55015.

Please ensure the most recent edition of the

appropriate local wiring regulations are observed

and suitable protection is provided e.g. a 10 amp

circuit breaker and voltage surge protection.

Please ensure that this device is disconnected

from the supply if an insulation test is made.

DANLERS Limited, Vincients Road, CHIPPENHAM, Wiltshire, SN14 6NQ, UK.

Telephone: +44 (0)1249 443377 Fax: +44 (0)1249 443388 E-mail: [email protected]

www.danlers.co.uk

Company Registered Number 2570169 VAT Registration Number 543 5491 38

DAT0089 CEFLPIR

WIRING DIAGRAMS

Note 2:

Alternative

position for

optional

load

wall switch

CEFL PIR

TECHNICAL DETAILS

Max. case

Note 2:

temperature:

Alternative

Storage

position for

optional

temperature:

load

wall switch

Max. relative

humidity:

CEFL PIR

CONNECTORS:

Terminal block

Wire size:

Wire strip length:

Tightening torque:

MECHANICAL DATA:

Dimensions:

Weight:

Degree of

protection:

Protection class:

Material (casing)

Finish / Colour

Protection class:

Other DANLERS Product ranges

- Remotely adjusted PIR occupancy switches

- Manually adjusted PIR occupancy switches

- Daylight linked dimming controls

- Photocell switches

- Time lag switches

- Outdoor security switches

- Dimmer switches inc. LED dimming

- HVAC controls

- Radio remote (RF) controls

Note 1: Optional manual

wall switch for overriding off.

230 VAC

Note 1: Optional manual

wall switch for overriding off.

230 VAC

CEFL PIR

DIAGRAM E (WIRING IN PIRS IN PARALLEL)

CONFORMITY AND STANDARDS:

+70 °C

EMC emission:

-25... +75 °C

EMC immunity:

0... 80%, non cond.

Safety:

0.5mm

- 2.5mm

Environment:

solid or stranded

6-7mm

VARIANTS - LOW VOLTAGE:

0,4 Nm/4 Kgf.cm

DANLERS also design and manufacture an

extensive range of Ceiling Flush Mounted

PIR Occupancy Switch variants some of

72mm x 72mm x

which are listed below:

68mm

CEFL PIR 12VAC

246g (unpacked)

CEFL PIR 12VDC

CEFL PIR 24VAC

CEFL PIR 24VDC

IP20

CEFL PIR 12VACVF

Built-in Class 2

CEFL PIR 12VDCVF

CEFL PIR 24VACVF

Flame-retardant

CEFL PIR 24VDCVF

polycarbonate

Matt /White (RAL

9003)

Built-in Class 2

Please call for more information or visit our website.

This product is covered by a warranty which

extends to 5 years from the date of manufacture.

MADE IN THE UK

(Presence detection)

Note 2:

Alternative

position for

optional

load

wall switch

CEFL PIR

Note 2:

Alternative

position for

optional

load

wall switch

CEFL PIR

EN60669-2-1:2004

inc. A12:2010

EN60669-2-1:2004

inc. A12:2010

EN60669-2-1:2004

inc. A12:2010

Complies with

WEEE and RoHS

directives

12V or 24V (ac or

dc) operation

12V or 24V (ac or

dc) operation Volt

Free contacts

11/11/2020