- ページ 12

防犯カメラ 3xLogic VISIX VX-VSS-20のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。3xLogic VISIX VX-VSS-20 14 ページ。 Stereoscopic people counting camera

4.4

Interfacing People Counting Rule with VIGIL Server via Analytics Bridge

After adding the camera to VIGIL Server, the final step required is to interface the camera's people counting rule

with VIGIL Server. This will allow the VIGIL Server to receive the people counting data from the camera and insert it

into the VIGIL database. To begin:

1. Navigate to Start > All Programs>VIGIL and click VIGIL Analytics Bridge. If the Analytics Bridge is not

installed, contact a 3xLOGIC support representative to receive the latest version.

The Analytics Bridge main screen is pictured below. All configuration of the Analytics Bridge takes place from this

screen.

To begin configuration of the VX-VSS-20 camera within VIGIL Analytics Bridge:

1. Click Add Device.

The Add/Edit Camera window will appear, shown below.

1. Select the VIGIL Server camera channel associated with the VX-VSS-20 camera from the VIGIL Camera

drop-down.

2. Set the Device Type to 3xLOGIC VISIX-IP.

NOTE:

device in VIGIL Server's Network Camera settings (see Fig 4-3). These values must be set to

3xLOGIC-VISIX-IP in both VIGIL Analytics Bridge and VIGIL Server to allow for successful

operation. This setting should be automatically configured in VIGIL Server when adding the

camera with the VISIX IP Setup Utility but if you are experiencing issues, confirm the device

type settings are set to 3xLOGIC VISIX-IP in both applications.

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

Figure 4-7 Figure 4-3: VIGIL Analytics Bridge Main UI

Figure 4-8 Adding a Device to VIGIL Analytics Bridge

The Device Type setting must correspond with the Type setting configured for this

Figure 4-9 VIGIL Server – Network Camera Settings