3xLogic VISIX VX-VSS-20 Краткое руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Камера безопасности 3xLogic VISIX VX-VSS-20. 3xLogic VISIX VX-VSS-20 14 страниц. Stereoscopic people counting camera

3xLogic VISIX VX-VSS-20 Краткое руководство по эксплуатации
4.4
Interfacing People Counting Rule with VIGIL Server via Analytics Bridge
After adding the camera to VIGIL Server, the final step required is to interface the camera's people counting rule
with VIGIL Server. This will allow the VIGIL Server to receive the people counting data from the camera and insert it
into the VIGIL database. To begin:
1. Navigate to Start > All Programs>VIGIL and click VIGIL Analytics Bridge. If the Analytics Bridge is not
installed, contact a 3xLOGIC support representative to receive the latest version.
The Analytics Bridge main screen is pictured below. All configuration of the Analytics Bridge takes place from this
screen.
To begin configuration of the VX-VSS-20 camera within VIGIL Analytics Bridge:
1. Click Add Device.
The Add/Edit Camera window will appear, shown below.
1. Select the VIGIL Server camera channel associated with the VX-VSS-20 camera from the VIGIL Camera
drop-down.
2. Set the Device Type to 3xLOGIC VISIX-IP.
NOTE:
device in VIGIL Server's Network Camera settings (see Fig 4-3). These values must be set to
3xLOGIC-VISIX-IP in both VIGIL Analytics Bridge and VIGIL Server to allow for successful
operation. This setting should be automatically configured in VIGIL Server when adding the
camera with the VISIX IP Setup Utility but if you are experiencing issues, confirm the device
type settings are set to 3xLOGIC VISIX-IP in both applications.
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20
Figure 4-7 Figure 4-3: VIGIL Analytics Bridge Main UI
Figure 4-8 Adding a Device to VIGIL Analytics Bridge
The Device Type setting must correspond with the Type setting configured for this
Figure 4-9 VIGIL Server – Network Camera Settings
12