- ページ 5
スピーカー Audiophile Systems COA MOJO1000FXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Audiophile Systems COA MOJO1000FX 12 ページ。 Amplified system with subwoofer and satellites + dsp effects and bluetooth®
ページを印刷する
MOJO1000fx - Amplified system with subwoofer and satellites + DSP multi effects and Bluetooth
A- Rear view
1
2 3
3.2 - More details about the command panel of the subwoofer:
12
13
14
15
1
2
"MOJO1000FX" in the list of the Bluetooth
The "Pair" LED must remain ON in green and a sound signal indicate that your device is connected.
The "Pair" nob can be use now to Play/pause your mp3 files.
Important : You can only connect one Bluetooth
the devices that you don't want to use. The last device get priority connexion.
8
7
6
4
5
11
10
9
8
7
6
5
3
4
®
devices to connect it.
®
device on the MOJO1000fx in the same time. You must disconnect
1 - Sattelite output for either a stereo left satellite or two mono
satellites.
CAUTION: only the MOJO1000fx satellites can be
connected via this output.
CAUTION
2- Power switch
3 - Voltage selector: Allows you to adapt the voltage of the ampli-
fier to the voltage of the electrical outlet.
4 - Fuse: Protects the power supply module and the built-in
amplifier.
If need to replace the fuse, please make sure the new fuse has
exactly the same characteristics.
5- Power input socket: Allows you to connect the speaker to
an electrical outlet. Use the supplied IEC cord, and make sure
the voltage delivered by the outlet is in adequation with the
value indicated by the voltage selector before turning on the
built-in amplifier.
6- Output for stereo right satellite.
CAUTION: only a MOJO1000fx satellite can be
connected via this output.
CAUTION
7- Satellites storage compart
8- Clamping knob to secure the satellite once in its compart-
ment. Use the insert at the rear of the satellite to tighten it
safely.
1 - CH1 input via balanced COMBO
Connect here an XLR or JACK plug from a line level music
instrument or a microphone. The signal of this mono input
is spread across the right and left output of the system.
2 - CH2 inputs via balanced Jack
Connect here JACK plugs from a line level music
instrument or a microphone.
3- CH3 inputs via balanced Jack, stereo 3,5
Jack and Bluetooth
Connect a line level instrument via the 6,35 Jack. The
AUX input allows you to connect via stereo Jack 3.5 any
extra line level source as external player. The Bluetooth
receiver is also on this channel.
Note about Bluetooth
The "Pair" LED is blinking quickly in green to indicate that
its searching a Bluetooth
On your smartphone or computer select the
®
®
®
pairing :
®
connexion.
English
®
Page 5