- ページ 5

コントローラー Belden Hirschmann iVISOR DS85のPDF 製品情報をオンラインで閲覧またはダウンロードできます。Belden Hirschmann iVISOR DS85 5 ページ。 Faceplate replacement

14. Insert the assembly back into the housing and screw the four Phillips screws into the back of the housing

(figure A). It is very important to ensure that the wires or ribbon cables are not pinched during this process.

Do not fully tighten the screws; it will make it easier to align the screw on the front of the housing.

15. Reinstall the four Phillips screws on the front faceplate (figure B). Once installed, you can now tighten the

screws on the back of the housing.

16. The replacement is now complete.

Note: There is no warranty of any kind for this replacement. Any damages incurred during this process are

the responsibility of the end user (party performing the replacement). Please contact your local dealer if

additional information is required to complete this process.

Hirschmann Automation and Control

1540 Orchard Drive

Chambersburg, PA 17201

Document: 530117 - DS85 Faceplate Replacement

Service : (717) 217-2250

Parts / Sales : (717) 217-2269

www.hirschmann-usa.com

Page 5 of 5