- ページ 6

アンプ Constellation audio Inspiration INTEGRATED 1.0のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Constellation audio Inspiration INTEGRATED 1.0 16 ページ。

3. Speaker outputs

The Inspiration Integrated offers one set of Argento speaker cable binding posts for each channel. Connect the marked

connector or cable conductor for the left speaker cable to the left positive (+ or red) binding post and the unmarked con-

nector to the negative (- or black) binding post. Repeat with the right speaker cable. Make sure the speaker cables on both

channels are connected identically, with the marked cable conductor or connector to red, unmarked conductor or connec-

tor to black.

Do not allow the speaker cable terminals to touch each other or to touch the amplifier

chassis.

SPECIAL NOTE FOR CONNECTING THE INSPIRATION INTEGRATED TO A SUBWOOFER:

If you intend to con-

nect this amplifier to the speaker-level inputs of a powered subwoofer or a subwoofer amplifier,

BE VERY

CAUTIOUS.

The negative input terminals of a powered subwoofer or subwoofer amp are almost always grounded together, and this

is incompatible with the Balanced Bridged design of this amplifier. Serious damage to the Inspiration Integrated could

result. Consult the manufacturer of the subwoofer or subwoofer amplifier to find out if the negative speaker input termi-

nals are grounded together.

If the manufacturer doesn't know or isn't sure, you can use a multimeter (available for less than $10 on Amazon) to check.

Set the multimeter for ohms (Ω). When you touch the probes from the meter together, it should read 0 ohms (or maybe

0.1 or 0.2 ohms). Now touch the probes to the metal parts of the two negative (black) binding posts on the subwoofer's

input. If it reads 0 or some tiny amount like 0.1 ohms,

DO NOT

connect the Inspiration Integrated to this input. Instead,

use the amp's XLR line outputs, which will prevent damage to the amplifier and will also deliver better sound quality.

The Inspiration Integrated offers a single headphone output on a 1/4-inch (6.2mm) jack. To activate this output (and mute

the speaker outputs), you must use the front-panel controls. The Inspiration Integrated's headphone amplifier has enough

power to drive any dynamic or planar magnetic headphones. If your headphones have a 1/8-inch (3.5mm) plug, use a 1/8-

inch to 1/4-inch adapter. Many headphones come with the adapter.