- ページ 12
スパ・アクセサリー Aeware in.zoneのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Aeware in.zone 14 ページ。 Innovative corona discharge ozonator
ページを印刷するin.zone
Warnings!
•
Do not power in.zone if it is not connected to a running
injection system; ozone can be harmful to your health
if inhaled.
•
It is better not to smell ozone at the water surface;
if you can smell ozone, it is recommended to review the
injection system.
•
To improve the contact between water and ozone, lenghten
the mixing time of ozone and water by using a longer tube
after the injection point or by reducing the air fl ow (vacuum)
that sucks ozone in the water. A static mixer can also be
added in the water tube after the injection point to improve
the contact between water and ozone. (Search for static
mixers at www.coleparmer.com)
Suction test
Y
You should do a suction test
You should do a suction test
ou should do a suction test o make sure you have enough air fl ow
ou should do a suction test t
t
to inject ozone in your spa system.
1- Make sure in.zone tube is connected to its check valve and
injection point. Remove tube nozzle from in.zone enclosure.
2- Make sure your in.zone is not powered and start the pump you
plan to use to inject the ozone.
3- Take the tube nozzle end and put it on your thumb. You should
feel a vacuum effect on your skin and hear a sound when you
remove the tube from your thumb.
installation
11