- ページ 10

アンプ Audiotec Fischer Match PP 86DSPのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Audiotec Fischer Match PP 86DSP 15 ページ。 8-chanell amplifier with integrated 9-chanell dsp

ページを印刷する

your speakers. Ensure that the loudspeakers

are correctly connected (in phase), i.e. plus to

plus and minus to minus. Exchanging plus and

minus causes a total loss of bass reproduction.

The plus pole is indicated on most speakers.

The impedance of the speakers must not be

tection will be activated.

Attention: Solely use the connection cable with

included in delivery for connecting further loud-

speakers!

10. Connecting the remote output

This output (Remote Out) is used to supply

are connected to the Mono Line Output of the

PP 86DSP. Always use this remote output sig-

off switching noises.

Caution:

the OE speakers in the car will not be able to

handle this extra power permanently. As long

as you do not replace the original speakers by

loudspeakers with higher power handling be

very careful when you crank up the volume. If

you hear strong distortion, please reduce the

volume to an appropriate level in order to avoid

damaging your speakers.

Note: Audiotec Fischer is not responsible for

any damages to OE speakers that are used in

combination with the PP 86DSP!