- ページ 8

屋外倉庫 Duratuf KIWI MK2AのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Duratuf KIWI MK2A 16 ページ。
Duratuf KIWI MK2A にも：組立説明書 (18 ページ)

MK2A LOUVRE WINDOW (Optional)

Step 1: Lay out the two window studs (883mm) and Nog

(634mm) on a flat surface. Position Nog and nail

in place using 2x 75mm nails at each end.

Step 3: Nail wall Sheets to window framing using 30mm

clouts. (return to step 4 on page 7 and com-

plete). Then fit Window Frame). Position Window

Frame centrally on window opening and rivet it to

ribs. Pre-drill holes in each corner and nail Win-

dow Frame to framing, using 50mm nails.

Step 5: Rivet Over Panel to the Window Frame with riv-

ets.

588mm

50mm

NAILS

RIVITS

Step 2: On the inside of the shed, position studs and

Nog centrally on window opening. Make sure the

studs are parallel and nail into Top Plate and

End Wall Nog.

Step 4: If the Window is in the gable end, temporarily

position the Over Panel above Window Frame.

Following the same angle as the gable, mark

and cut to suit.

Step 6: From the inside of the shed, slide Louvre Glass

into Louvre Units attached to the Window Frame.

Bend up tabs to keep Glass in position.