- ページ 9

屋外倉庫 Duratuf KIWI MK2AのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Duratuf KIWI MK2A 16 ページ。
Duratuf KIWI MK2A にも：組立説明書 (18 ページ)

MK2A FIXED WINDOW (Optional)

Step 1: Lay out the two window studs (883mm) and

Nog (590mm) on a flat surface. Position

Nog and nail in place using two 75mm nails

at each end.

Follow Steps 2 - 5 on page 8.

Step 6: From the outside of the shed, place glass

in Window Frame. Attach a Glazing Bead

(G100) with three rivets to each side of the

Window Frame to hold glass in place. Pre-

drilling Glazing Beads is recommended.

MK2A DOOR JAMB & CORNER FLASHINGS

Step1: Fit Door Jamb Flashing (104) in between

Top and Bottom Plates and hard against

Stud. Attach Door Jamb Flashing with

three rivets into Rib on the outside and

three 30mm clouts into studs on the in-

side. Repeat with the other Door Jamb.

Step2: Measure and cut Doorstep Flashing (106)

to fit in between Door Jambs. Position the

Doorstep Flashing in between the Door

Jambs at bottom of doorway, nail through

top of flashing using five 30mm Clouts. Re-

peat with the Overdoor Flashing (105).

570mm